- RFID reader, antenna, and tags (transponders). - Available serial port or USB port with USB-to-Serial converter. - About 50 MB of free disk space. - Java Virtual Machine (version 1.4 or higher). Detailed Software: TagTracker is written in Java and should be capable of running in any Java environment. A number of operating systems have been tested and reported to work, however official support is available only for Sun JRE 1.4 and above under Microsoft Windows (all versions) and SuSe Linux 9.1 and above. During the installation process the installation application will check to make sure you have a properly installed version of Java. If you do not, you will be prompted to install it from the copy provided on the distribution CD-ROM or from the Internet. Hardware: You will need an RFID reader, multiplexer (if applicable) an antenna(s) connected to the computer (some RFID readers have a built-in antenna). The supported drivers interact with the reader via serial port. If you do not have an available serial port, you can use a USB-to-Serial converter. In this case you need to have the driver for the particular converter installed on your machine before you can start using TagTracker. Recommended system is at least Pentium II 266 MHz and above with at least 128 MB of RAM and around 50 MB of disk free space. TagTracker occupies approximately 6 MB of disk space plus the installation of the JRE (Java Runtime Environment). Contact Information DataBrokers, Inc. RFID software & consulting 4225 West Liberty St. Cincinnati, OH 45205 phone: (513) 942-5777 e-mail: support@databrokers.net http://www.databrokers.net |